We are embarking on a mission trip to India in November in support of Go Harvest Mission Ministries. Since 2016 Go Harvest has been performing missions of spreading the gospel, distributing bibles. and equipping indigenous leaders in New Zealand, Brazil, Thailand, Myanmar, India along with numerous other countries within the 10/40 window. For this specific trip we will be traveling to India to conduct a 4 day outdoor revival where we will be working with over 15,000 refugees from the Myanmar region.
We are raffling off two firearms in order to raise funds for the ministry and our travel logistics.
Tickets: $150 each Raffle ends at 12pm EST on September 6, 2024 TICKETS ARE CAPPED AT 50!
WINNER WINS BOTH FIREARMS!
***We have an FFL that will ship both weapons. Once the winner is chosen we will facilitate proper shipping and processing of paperwork***
Barrel: Chrome-moly vanadium steel 16" barrel chambered in 5.56 NATO, with a 1:7 twist rate, M4 barrel extension, and a carbine-length gas system. The M4 profile barrel is finished off with a 13.5” PSA M-Lok free-float handguard, low-profile gas block, and A2 flash hider.
Upper: Forged 7075-T6 A3 AR upper is machined to MIL-SPECS and hard coat anodized. Uppers include forward assist and dust cover. These uppers are made for us right here in the USA by a mil-spec manufacturer.
Bolt Carrier Group: The bolt is made of shot-peened, Mil-spec Carpenter 158® steel. The gas key is secured with grade 8 fasteners and staked to the 8620 Steel Full-auto profile carrier.
Lower: These forged lowers are quality made using 7075-T6 aluminum and are marked "MULTI" for the caliber. The finish is hard-coat anodized. The Mil-spec diameter 7075-T6 buffer tube is hard-coat anodized, has 6 adjustment positions and is fitted with a PSA Classic Carbine Stock for a traditional AR-15 look and feel. The rifle is finished off with a PSA Classic A2 grip, and standard Mil-Spec AR-15 Fire Control Group.https://d225180wvb95st.cloudfront.net/74c95d68-fafd-4193-9fe3-bf6de7742685.jpg
.308 Kel-Tec RFB - BULLPUP
RFB stands for Rifle Forward-ejecting Bullpup. Designed to feed from the FN/FAL metric pattern 20-round magazine,. 18.5" barrel. Trigger pull - 5lbs and a clean break. Scope: Primary Arms: ACSS Raptor - 5.56/5.45X39/.308
RFB's features. The overall length of the RFB is, 27.5 inches. It also has a 18 and a half inch barrel. Ambidextrous bolt stop/ bolt release Ambidextrous mag catch/ mag release and your two rear assembly pins back underneath.
On the stock, you'll notice it's thick with a Picatinny section on the bottom and a sling Loop cut out for sling attachment. Just above the grip and trigger is your ambidextrous safety and also is your middle assembly pin. On top of the RFB we have the picatinny rail system for mounting optics and accessories. On the other side is your charging handle can easily and quickly be moved to the other side of the gun. Just in front of your top picatinny rail is your gas regulator and below the regulator is a set of threads. That is for an accessory that we sell on our website.
Lastly, the business end has the standard 5/8ths 24 thread pitch for mounting a compensator brake adapter or suppressor wherever it's legal.
